Honda CB HORNET 160R 2015 Shop Manual page 86

FUEL SYSTEM
Be careful not Check that the spring installed correctly by pushing the
bottom of the piston with your finger and make sure that
to pinch the
diaphragm the piston returns back in place smoothly.
under the
chamber cover,
and to keep
the spring
straight when
compressing the
spring.
Install the 2 screws of the vacuum chamber cover before
releasing the vacuum piston.
Tighten the two screws.
TORQUE: 2.1 N·m (0.2 kgf·m, 1.6 lbf·ft)
Install the two screws and throttle cable stay.
Tighten the two screws.
TORQUE: 3.4 N·m (0.4 kgf·m, 2.5 lbf·ft)
INSTALLATION
Take care of
Install the carburetor to the connecting hose and insulator.
the direction of
Loosely tighten the insulator band screw and air cleaner
the band screw
connecting boot band screw.
while installing
as shown.
Connect the one way valve hose.
5-14
COMPRESSION SPRING
VACUUM PISTON
VACUUM CHAMBER COVER
SCREWS
THROTTLE CABLE STAY
SCREWS
CARBURETOR
BAND
ONE WAY
SCREW
VALVE HOSE
INSULATOR
SCREW