Honda CB HORNET 160R 2015 Shop Manual page 191

CRANKCASE/TRANSMISSION/KICKSTARTER
Install the balancer drive gear by aligning the keyway of
BALANCER DRIVE GEAR
the gear and the crankshaft.
Align
Install the balancer driven gear by aligning the keyway of
BALANCER DRIVEN GEAR
the gear and the balancer shaft.
Align
Align the punch marks on the balancer drive gear and
Align
balancer driven gear for arranging the final timing for the
movement between the crankshaft and the balancer shaft.
Install the balancer driven weight 'A' on to the balancer
WEIGHT 'A'
shaft by aligning its keyway.
Install and tighten the balancer driven gear nut and washer
to the specified torque using the below mentioned special
tool.
TORQUE : 64 N.m (6.5 kgf.m, 47 lbf.ft)
TOOLS:
Gear holder 07006-KRBT900
Align
11-19