Honda CB HORNET 160R 2015 Shop Manual page 70

LUBRICATION SYSTEM
Install the oil pump cover and tighten the screw.
TORQUE: 3 N·m (0.3 kgf·m, 2.2 lbf·ft)
INSTALLATION
Install two dowel pins into the crankcase.
Install the oil pump and tighten the mounting bolts to the
specified torque.
TORQUE: 12 N.m (1.2 kgf.m, 9 lbf.ft)
Apply clean engine oil to the oil pump driven gear teeth
and rotor shaft then align and install it.
Install the right crankcase cover (page 9-5).
4-6
SCREW
DOWEL PINS
MOUNTING BOLTS
DRIVEN GEAR
PUMP COVER
OIL PUMP
ROTOR SHAFT