Cover Headlight Rr; Front Cowl Disassembly - Honda CB HORNET 160R 2015 Shop Manual

FRAME/BODY PANELS/EXHAUST SYSTEM
FRONT COWL
REMOVAL/INSTALLATION
Remove the front cowl pan screws (4 nos.).
Align the
grommet with
Disconnect 6P black connector (Headlight).
front cowl
Carefully release the front cowl from the boss.
Remove the front cowl.
During the installation align boss with grommet in front cowl.
Installation is in the reverse order of removal.

FRONT COWL DISASSEMBLY

REMOVAL/INSTALLATION
Remove the windscreen screw (1 no.) and release carefully
from lugs.
Remove the headlight aim adjusting bolt (1 no.) and
headlight mounting bolts (2 nos.).
Remove both the winkers from the stays by removing
their bolts.
Remove the right and left garnish by removing screws
(2 nos.) from both side and tabs carefully.
Remove the number plate stay by removing screws (4 nos.).
Installation is in the reverse order of removal.

COVER HEADLIGHT RR

REMOVAL/INSTALLATION
Remove the 16P grey connector from combination meter.
Remove the 2P white winker relay connector.
Remove the 5P white passing relay connector.
Disconnect all connectors from the wiring harness.
Remove mounting bolts (4 nos) from cover headlight RR.
Installation is in the reverse order of removal.
2-2
6P BLACK
GROMMET
CONNECTOR
FRONT COWL
RIGHT
GARNISH
WINDSCREEN
RIGHT TURN
WINKER
SCREWS
LEFT
NUMBER
GARNISH
PLATE STAY
COVER HEADLIGHT RR WIRE HARNESS
MOUNTING
BOLTS
16P CONNECTOR
BOSS
GROMMET
PAN
SCREWS
HEADLIGHT
LEFT TURN
WINKER
TURN SIGNAL
RELAY CONNECTOR