CLUTCH/GEARSHIFT LINKAGE
Apply a locking agent to the gearshift cam bolt threads.
Install and tighten the gearshift cam bolt to the specified
torque.
TORQUE: 12 N·m (1.2 kgf·m, 9 lbf·ft)
Apply clean engine oil to the gearshift spindle journal
rotating area.
Install the thrust washer to the gearshift spindle, and insert
the spindle into the crankcase.
Install the gearshift spindle by aligning the return spring
ends with the stopper pin.
Install the following:
– Clutch assembly (page 9-10)
PRIMARY DRIVE GEAR
REMOVAL
Remove the clutch assembly (page 9-6).
Remove the primary drive gear.
9-14
BOLT
GEARSHIFT DRUM STOPPER
GEARSHIFT SPINDLE
WASHER
Align
GEARSHIFT SPINDLE
PRIMARY DRIVE GEAR