Honda CB HORNET 160R 2015 Shop Manual page 192

CRANKCASE/TRANSMISSION/KICKSTARTER
Install the second weight 'B' by aligning the spline on the
weight with the spline on the balancer shaft.
Tighten the washer and nut to the specified torque.
TORQUE : 55 N.m (5.5 kgf.m, 44 lbf.ft)
When Apply molybdenum oil solution to the push plug.
installing the
Install the push plug and spring.
push plug,
make sure
the crankshaft
bearing outer
touches the
taper part of
push plug.
Apply locking agent to the threads of the push plug bolt.
Install the push plug plate and bolt.
Tighten the bolt to the specified torque.
TORQUE: 10 N.m (1.0 kgf.m, 7 Ibf.ft)
Install the cam chain through the crankcase.
Install the cam chain to the sprocket.
Install the tensioner guide and tensioner guide plate.
Install and tighten the tensioner guide plate bolts (2 nos).
Install the removed parts in the reverse order of removal.
11-20
WEIGHT 'B'
Align
PUSH PLUG
SPRING
PUSH PLUG
PLATE
CAM CHAIN
BOLT
SET PLATE BOLT