Honda CB HORNET 160R 2015 Shop Manual page 102

ENGINE REMOVAL/INSTALLATION
Install and tighten the bolts (2 nos.) on left crankcase rear
cover.
Install the choke cable stay and tighten the bolts (2 nos.).
Install the gear shift pedal and tighten the pinch bolt.
Install the kickstarter pedal by aligning mark on the kick
spindle.
Install and tighten the pinch bolt.
Connect the 2 terminals of the starter motor.
6-6
BOLTS
LEFT CRANKCASE
REAR COVER
PINCH BOLT
PEDAL
Align
PINCH BOLT
TERMINALS
BOLTS
CHOKE CABLE STAY
KICKSTARTER
PEDAL
NUT