CRANKCASE/TRANSMISSION/KICKSTARTER
CRANKCASE SEPARATION
BALANCER GEAR REMOVAL
Refer to service information (page 11-1) for removal of
necessary parts before disassembling the crankcase.
Remove the cam chain tensioner set plate bolts (2 nos.)
and tensioner set plate.
Remove cam chain tensioner guide.
Remove the cam chain.
Remove the bolt and push plug plate.
Remove the push plug and spring.
Hold the gear balancer drive and gear balancer driven
using gear lock.
Remove the driven balancer gear and weight nut.
TOOLS:
Gear holder
Remove the driven balancer gear & weight.
Remove woodruff keys from the balancer shaft from right
side.
11-4
07006-KRBT900
CAM CHAIN
BOLT
PUSH PLUG
PLATE
PUSH PLUG
GEAR BALANCER DRIVEN
SET PLATE BOLT
SPRING
NUT
GEAR LOCK