Table of Contents
Advertisement
LIGHTS/METERS/SWITCHES
HEADLIGHT UNIT
REMOVAL/INSTALLATION
Remove the headlight adjusting bolt.
ADJUSTING BOLT
Remove the front cowl (page 2-2).
CLIPS
Disconnect the headlight connector.
Remove the clips and headlight unit.
Installation is in the reverse order of removal.
Adjust the headlight beam vertically (page 3-21)
CONNECTOR
BRAKE/TAIL LIGHT
BRAKE/TAIL LIGHT
LED UNIT REPLACEMENT
Remove the LED brake/tail light by following the
disassembly procedure as given in chapter 2 (page 2-5).
Replace the LED tail light assy. with a new one under
warranty (As per conditions).
Installation is in the reverse order of removal.
NUMBER PLATE LIGHT BULB
Remove the number plate light lens by removing the
BULB
screws (2 nos.).
Slightly press the bulb and turn it counterclockwise.
Replace the bulb.
Installation is in the reverse order of removal.
SCREWS
NUMBER PLATE LENS
17-3
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
