Honda CB HORNET 160R 2015 Shop Manual page 109

CYLINDER HEAD/VALVES
Remove the cylinder head cover and cover packing.
PACKAGING
Remove the PAIR passage O-ring from the cylinder head
cover.
HEAD COVER
O-RING
Remove the two bolts.
O-RING
Remove the air supply pipe and O-ring.
BOLTS
INSTALLATION
O-RING
Apply clean engine oil to a new O-ring.
Install the new O-ring to the air supply pipe.
Install the air supply pipe to the cylinder head cover.
BOLTS
Install and tighten the two bolts.
Clean the oil passages of the cylinder head cover using
compressed air.
O-RING
7-5