Download  Print this page

Seat; Right Side Cover; Left Side Cover; Fuel Tank Assembly - Honda CB HORNET 160R 2015 Shop Manual

Hide thumbs

Advertisement

SEAT

REMOVAL/INSTALLATION
Insert the ignition key into the seat lock and turn it clockwise.
Slide seat backward and remove the seat.
Install the seat, while aligning its hook with the bracket on
the frame and press it to lock and remove the ignition key.

RIGHT SIDE COVER

REMOVAL/INSTALLATION
Remove the right side cover pan screw (1 no.) and trim
Be careful not
clips (2 nos.) from the fuel tank.
to damage
the side cover
Carefully release the right side cover bosses (3 nos.) from
boss.
the grommet and slide the cover towards rear wheel for
easy removal.
Remove the right side cover.
Installation is in the reverse order of removal.

LEFT SIDE COVER

REMOVAL/INSTALLATION
Remove the left side cover pan screw (1 no.) and and trim
Be careful not
clips (2 nos.) from the fuel tank.
to damage
the side cover
Carefully release the left side cover bosses (3 nos.) from
boss.
the grommet and slide the cover towards rear wheel for
easy removal.
Remove the left side cover.
Installation is in the reverse order of removal.

FUEL TANK ASSEMBLY

REMOVAL/INSTALLATION
Remove seat (page 2-3)
Remove the left side cover (page 2-3).
Remove the left side rear garnish set (page 2-6).
Turn the fuel valve to "OFF" position, and disconnect the
fuel hose from the fuel valve.
FRAME/BODY PANELS/EXHAUST SYSTEM
SEAT
PAN
SCREW
TRIM CLIP
GROMMET
TRIM CLIP
LEFT SIDE
TRIM CLIP
COVER
FUEL VALVE
FUEL HOSE
IGNITION KEY
GROMMET
TRIM CLIP
RIGHT SIDE
COVER
PAN
SCREW
2-3

Advertisement

Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: