Front Fender - Honda CB HORNET 160R 2015 Shop Manual

FRONT FENDER

REMOVAL/INSTALLATION
Remove the front wheel (page 12–9).
Remove the pan screws (2 nos.) from both side and inner
bolts (2 nos.) from the front fender mounted on the forks.
Remove the following :
– Inner bolts with washer (2 nos.)
– Front fender and stay
Installation is in the reverse order of removal.
DISASSEMBLY/ASSEMBLY
Remove the front fender (page 2-5).
Remove the mounting screws (2 nos.) from front fender B
and release front fender A.
Assembly is in the reverse order of disassembly.
FRAME/BODY PANELS/EXHAUST SYSTEM
PAN
SCREWS
RUBBER FR FENDER
MOUNTING
COLLAR A FR
FENDER
WASHER
INNER BOLT
FRONT FENDER - A
FRONT
FENDER
PAN
SCREWS
SCREWS
FRONT FENDER - B
2-5