Honda CB HORNET 160R 2015 Shop Manual page 149

CLUTCH/GEARSHIFT LINKAGE
Install the tabs Install the clutch center assembly into the clutch outer.
OUTER CLUTCH
of clutch disc A
SHALLOW SLOT
(out side) to the
shallow
slots of the
clutch outer.
DISC A (OUTSIDE)
CLUTCH CENTER ASSEMBLY
Install the lock washer.
WASHER
Apply clean engine oil to the threads and seating surface
of the clutch center lock nut, and install it.
LOCK NUT
Attach the clutch center holder to the pressure plate using
CLUTCH CENTER HOLDER
clutch lifter plate bolts to hold the clutch center, then tighten
the clutch center lock nut to the specified torque using
special tool.
TOOL:
Clutch center holder 070SRTKSP011
TORQUE: 83 N·m (8.3 kgf·m, 61 lbf·ft)
LOCK NUT
Install the clutch springs, clutch lifter plate and clutch lifter
plate bolts.
SPRINGS
LIFTER PLATE
Tighten the clutch lifter plate bolts to the specified torque
in a crisscross pattern in several steps.
TORQUE: 12 N·m (1.2 kgf·m, 9 lbf·ft)
BOLTS
9-11