Honda CB HORNET 160R 2015 Shop Manual page 195

CRANKCASE/TRANSMISSION/KICKSTARTER
Hook the return spring to the hole of the kickstarter spindle,
RETURN SPRING
and there install the collar by aligning its cut-out with the
spring.
Install the lock washer, and press it.
Install the lock washer in the groove of the kickstarter
SPINDLE
spindle.
INSTALLATION
Apply molybdenum oil solution to the kickstarter drive
gear teeth.
Install the kickstarter assembly and insert the ratchet stop
into the right crankcase groove.
Hook the return spring to the crankcase right.
KICKSTARTER ASSEMBLY
Rotate the return kickstarter clockwise, counter clockwise
(if necessary) in order to ease the installation.
Install the kick stopper by aligning the punch marks on the
stopper and kickstarter shaft.
Install the snap ring.
Install the right crankcase (page 11-17).
Align
11-23