Rear Grip; Rear Garnish Set - Honda CB HORNET 160R 2015 Shop Manual

FRAME/BODY PANELS/EXHAUST SYSTEM

REAR GRIP

REMOVAL/INSTALLATION
Remove the seat (page 2-3).
Remove the mounting bolts (2 nos.) from right rear grip.
Remove the mounting bolts (2 nos.) from left rear grip.
Installation is in the reverse order of removal.

REAR GARNISH SET

REMOVAL/INSTALLATION
Remove the following:
Carefully
release the
– Seat (page 2-3)
garnish from
– Rear grip (page 2-6)
boss (metal) by
tilting slightly.
– Right side cover (page 2-3)
– Left side cover (page 2-3)
Remove the mounting bolts (1 no.) from the rear garnish
from both side.
Remove the screw (1 no.) from the fuel tank of the rear
garnish from both side.
Remove the screw (1 no.) from the bottom side of the rear
garnish from both side.
Installation is in the reverse order of removal.
2-6
MOUNTING
BOLTS
REAR GRIP
RIGHT
REAR GARNISH
RIGHT
SCREWS
BOSS
REAR GRIP
LEFT
BOLTS
REAR
GARNISH
LEFT