LIGHTS/METERS/SWITCHES
BRAKE LIGHT SWITCH
FRONT
Disconnect the front brake light switch connectors.
There should be continuity with the brake lever squeezed,
and there should be no continuity when the brake lever is
released.
REAR
Remove the right side cover (page 2-3).
Disconnect the rear brake light switch connectors, and
check for continuity between the terminals.
There should be continuity with the brake pedal squeezed,
and there should be no continuity when the brake pedal
is released.
Continuity : Green/ Yellow - Black
NEUTRAL SWITCH
INSPECTION
Remove the left side cover (page 2-3).
Disconnect the neutral switch connector.
Shift the gear position into the neutral.
Check for continuity between the light green/red terminal
and body ground.
There should be continuity with the transmission is in
neutral, and no continuity when the transmission is into
gear.
17-12
NEUTRAL SWITCH WIRE
CONNECTORS
NEUTRAL SWITCH WIRE
CONNECTORS
FRONT BRAKE
LIGHTING SWITCH
2P CONNECTOR