Edge-Core ECS4660-28F Management Manual page 253

Figure 91: Configuring Protocol VLANs
To configure a protocol group:
1.
2.
3.
Figure 92: Displaying Protocol VLANs
Use the VLAN > Protocol (Configure Interface - Add) page to map a
M
APPING
protocol group to a VLAN for each interface that will participate in the
P G
ROTOCOL ROUPS
group.
I
TO NTERFACES
CLI R
◆
C
◆
Click VLAN, Protocol.
Select Configure Protocol from the Step list.
Select Show from the Action list.
EFERENCES
"protocol-vlan protocol-group (Configuring Interfaces)" on page 1373
U
OMMAND SAGE
When creating a protocol-based VLAN, only assign interfaces using this
configuration screen. If you assign interfaces using any of the other
VLAN menus such as the VLAN Static table
will admit traffic of any protocol type into the associated VLAN.
– 253 –
| VLAN Configuration
C 6
HAPTER
Protocol VLANs
(page 231), these interfaces