Operation Mode - ABB ACS580 Firmware Manual

184 Parameters
No. Name/Value
19

19 Operation mode

19.01 Actual operation
mode
Zero
Speed
Torque
Min
Max
Add
Reserved
Scalar (Hz)
Forced magn.
19.11 Ext1/Ext2 selection
EXT1
EXT2
FBA A MCW bit 11
DI1
DI2
DI3
DI4
DI5
DI6
Reserved
Timed function 1
Timed function 2
Timed function 3
Reserved
Supervision 1
Supervision 2
Supervision 3
Reserved
Description
Selection of local and external control location sources and
operating modes.
See also section Operating modes of the drive
Displays the operating mode currently used.
See parameters 19.11...19.14.
This parameter is read-only.
None.
Speed control (in vector motor control mode).
Torque control (in vector motor control mode).
The torque selector is comparing the output of the speed
controller (25.01 Torque reference speed
reference (26.74 Torque ref ramp
two is used (in vector motor control mode).
The torque selector is comparing the output of the speed
controller (25.01 Torque reference speed
reference (26.74 Torque ref ramp
two is used (in vector motor control mode).
The speed controller output is added to the torque reference
(in vector motor control mode).
Frequency control in scalar motor control mode (in scalar
motor control mode).
Motor is in magnetizing mode.
Selects the source for external control location EXT1/EXT2
selection.
0 = EXT1
1 = EXT2
EXT1 (permanently selected).
EXT2 (permanently selected).
Control word bit 11 received through fieldbus interface A.
Digital input DI1 (10.02 DI delayed
Digital input DI2 (10.02 DI delayed
Digital input DI3 (10.02 DI delayed
Digital input DI4 (10.02 DI delayed
Digital input DI5 (10.02 DI delayed
Digital input DI6 (10.02 DI delayed
Bit 0 of 34.01 Timed functions status
Bit 1 of 34.01 Timed functions status
Bit 2 of 34.01 Timed functions status
Bit 0 of 32.01 Supervision status
Bit 1 of 32.01 Supervision status
Bit 2 of 32.01 Supervision status
(page 89).
control) and torque
out) and the smaller of the
control) and torque
out) and the greater of the
status, bit 0).
status, bit 1).
status, bit 2).
status, bit 3).
status, bit 4).
status, bit 5).
(see page 255).
(see page 255).
(see page 255).
(see page 248).
(see page 248).
(see page 248).
Def/FbEq16
-
1
2
3
4
5
6
7...9
10
20
EXT1
0
1
2
3
4
5
6
7
8
9...18
19
20
21
22...24
25
26
27
28...31