Installing The Dcl-60-1/Dcz-60-2 Console; Figure 5-97 Remove Side Panel From Multiline Terminal - NEC Univerge SV9100 System Hardware Manual

Hide thumbs Also See for Univerge SV9100:

Table of Contents

Installing the DCL-60-1/DCZ-60-2 CONSOLE

Remove both plastic panels from the front of the multiline

Turn multiline terminal upside down.

Pry the side panel from the multiline terminal.

Turn the multiline terminal button side up.

Fit the projections of the supplied bracket into the side of the

multiline terminal.

Installing DT Series Digital and IP Multiline Terminals

To prevent possible damage to the DCL-60-1/

DCZ-60-2 CONSOLE or the DT Series multiline

terminal during installation or removal,

disconnect the line cord/LAN cable and the AC/

DC adapter from the DTL/ITL multiline terminal

If a "Digital Port Connection" is used, one

telephone can support a maximum of 32 DSS

If connected to an IP phone as a side option, a

maximum of one DSS Console is supported

per telephone.

Only one DCL-60-1/DCZ-60-2 CONSOLE can be

attached to the DT Series multiline terminal.