4.11.2 Install Tilt Legs; Figure 5-69 Attach Tilt Legs To Dt Series Terminal - NEC Univerge SV9100 System Hardware Manual

Issue 2.0
SV9100 System Hardware Manual

4.11.2 Install Tilt Legs

1. Place the telephone on a flat surface (button side down).
2. Lay the adjustable Tilt legs on top of the telephone. Refer to
5-69 Attach Tilt Legs to DT Series
3. Push the Tilt Legs upward until they snap into place.
4. Lift both ends of Tilt Legs until they come together (refer to
5-70 Connecting the Tilt Legs on page

Figure 5-69 Attach Tilt Legs to DT Series Terminal

Terminal.
5-74).
Figure
Figure
5-73