Configuring The Digital Telephone For The Ten Key Kit; Table 5-15 Numbered Keypad Type - NEC Univerge SV9100 System Hardware Manual

Issue 2.0
SV9100 System Hardware Manual
4.8.3

Configuring the Digital Telephone for the Ten Key Kit

1. With the telephone not plugged in and the handset on-hook, press the
4 and 6 buttons on the numbered keypad and connect the telephone
cable.
 This places the telephone into Service Class Read/Write (R/W)
mode. The Message Waiting LED should be On.
2. Press 2 on the numbered keypad to enter the Button Kit mode.

The Message Waiting LED should flash.
3. Follow the directions below for the type of keypad installed:

Table 5-15 Numbered Keypad Type

Numbered Keypad Type
Japan Value
Model A Telephone
Model B UX5000 Telephone
Call Center
Hotel-1
Hotel-2
Retirement Home
Japan 32-Button
Japan Economy
Model A Economy
Model B Economy
Reserve
4. Press line key 2, 8, 14 or 20 to save to memory. The display changes
back to the Service Class R/W mode and the Red Message Waiting
(MW) LED is On.
5. Press Exit to return the telephone to idle.
LED Indication
Push
(2D Style Terminal)
01 Line 1 LED on Red
02
Line 2 LED on Red
03 Line 1 and 2 LED on Red
04 Line 1 LED on Green
05 Line 2 LED on Green
06 Line 1 and 2 LED on Green
07
Line 1 LED flashing Red
08 Line 2 LED flashing Red
09 Line 1 and 2 LED flashing Red
10 Line 1 LED flashing Green
11 Line 2 LED flashing Green
12 Line 1 and 2 LED flashing Green
5-67