Issue 2.0
SV9100 System Hardware Manual
2.
Using the mini-plug connection cord, connect the ADA-L
Unit IN jack to the cassette recorder EAR PHONE jack
(Refer to
Figure 7-28 ADA-L IN Jack Connection
11.3.3.3
Send a Startup (REMOTE) Signal to the Recorder
1.
Using a Phillips screwdriver, remove the screw from the
ADA-L UNIT. Solder the cable to the T1 and T2 contacts on
the internal board (refer to
Points).
IMPORTANT
2.
Run the cable out of the opening of the ADA-L UNIT (refer to
Figure 7-30 ADA-L Cable
IMPORTANT
Figure 7-28 ADA-L IN Jack
Figure 7-29 ADA-L Solder
Ensure solder does not adhere to
❍
surrounding parts.
❍
Remove any solder waste from the board.
Figure 7-29 ADA-L Solder Points
Opening).
DSW 4 must be set to ON.
❍
❍
This function is not supported on some
recorders.
Connection).
7-35