Led Indications; Table 4-24 Gcd-2Bria Led Indications - NEC Univerge SV9100 System Hardware Manual

Table 4-24 GCD-2BRIA LED Indications

LED Indication
Live LED
Busy LED (Red)
(Green)
On
On
Flash (1s) On
Flash (1s)
On
Flash
(100ms)
Off
On
Off
Off
Flash 80ms (On/
Off) x 3/400ms
Off
4-60
3. Connect the cable from the NT1 Network Termination cable to the
CN7 or CN8 connector on the GCD-2BRIA blade and/or GPZ-2BRIA
daughter board. (Refer to
4-58 for the location of the connectors on the blade.)
5.3.3

LED Indications

LED indications for the GCD-2BRIA are listed in
LED Indications. Each LED is listed with its associated function and LED
and Operational status.
Refer to Figure 4-21 GCD-2BRIA Blade on page 4-58
LEDs on the blade.
Operation Status
System Initializing
The assignment of the unit is refused.
Trouble found during self-diagnostics.
A Channel is busy (use
Normal
another from CH1 ~ CHx).
Operation
All channels are idle.
A Channel is busy (use
Unit Busy
another from CH1 ~ CHx).
All channels are idle.
Downloading firmware.
Figure 4-21 GCD-2BRIA Blade on page
Table 4-24 GCD-2BRIA
for the location of the
Remarks
–
When you exceed the system
capacity.
When the main software version is
not matched.
–
–
–
–
–
–
Installing the SV9100 Blades
Issue 2.0