Figure 4-17 Installing The Gpz-4Lc( )/Gpz-8Lc( ) Daughter Board; Gpz-4Lc( )/Gpz-8Lc( ) (4-Port/8-Port Sli Daughter Board) - NEC Univerge SV9100 System Hardware Manual

4.4

Figure 4-17 Installing the GPZ-4LC( )/GPZ-8LC( ) Daughter Board

4-44

GPZ-4LC( )/GPZ-8LC( ) (4-Port/8-Port SLI Daughter Board)

4.4.1 Description
The GPZ-4LC( ) and GPZ-8LC( ) daughter boards are mounted on the
GCD-4LC( )/GCD-8LC( ). These boards provide:
4-Port Single Line and 8-Port Single Line analog extension ports

(used for on-premise analog telephones, fax machines, and analog
modems).

The GCD-4LC( )/GCD-8LC( ) is not rated for OPX use. A
GCD-4DIOPB blade should be used instead (it supports the analog
DID and single line telephone interface functions, such as Off-
Premise Extensions).
Connector for GCD-4LC( )/GCD-8LC( ) Blades

Ring Generator

Caller ID Sending Ability

Message Wait Lamp Ability

Constant current type battery feeding (25mA / -28Vdc)

Feeding Polarity Reverse Ability

Issue 2.0
Installing the SV9100 Blades