Remove And Replace Handset Battery; Figure 6-18 Removing Battery Cover From Handset; Figure 6-19 Removing Battery From Handset - NEC Univerge SV9100 System Hardware Manual

Hide thumbs Also See for Univerge SV9100:
Table of Contents

Advertisement

Issue 2.0
SV9100 System Hardware Manual
2.4.3

Remove and Replace Handset Battery

The battery loaded in the Bluetooth handset has a useful life of about two
years, depending on how the handset is used. If the battery voltage
diminishes quickly after the battery has been charged for a long time,
replace with a new Li-ion battery.
1.
Remove cover from back of handset.

Figure 6-18 Removing Battery Cover from Handset

2.
Remove existing battery and dispose of properly.

Figure 6-19 Removing Battery from Handset

3.
Install new Li-ion battery.
NOTE
4.
Reinstall battery cover.
Full charge takes approximately 16 hours.
6-15

Advertisement

Table of Contents
loading

Table of Contents