Configuring The Ip Telephone For The Ten Key Kit; Table 5-16 Keypad Kit Type; Table 5-17 Line Key Kit Type - NEC Univerge SV9100 System Hardware Manual

Issue 2.0
5-68
4.8.4

Configuring the IP Telephone for the Ten Key Kit

1. Press Menu, then 0 (Config) to enter the terminal program mode.
2. At the Login screen, enter the user name (default = ADMIN) and
password (default = 6633222) and press the OK Softkey.
3. Press 3 for Maintenance Setting.
4. Press 4 for Adjust.
5. Press 2 for Key Kit Type.
6. Press the Up/Down key to select the keypad kit.
Keypad Kit Entry
7. Press 4 for Next.
8. Press the Up/Down key to select the line key kit.
 By default, the correct line key kit for the keypad kit selected above
is highlighted.
Line Key Kit Entry

Table 5-16 Keypad Kit Type

Kit1
Type A – Japan with cursor key
Kit2
Type A – US with cursor key
Kit3 Type B – US with cursor key
Kit4 –
Kit8 32 Line Key without cursor key
Kit9 Type A – Japan without cursor key
Kit10 Type A – US without cursor key
Kit11 Type B – US without cursor key
Kit12 –

Table 5-17 Line Key Kit Type

Kit12
Enhanced 12-Button
Kit24 Enhanced 24-Button
Kit32 Enhanced 32-Button
Kit8 DESI-Less
Kit6
Value 6-Button
Kit2 Value 2-Button
Kit0 IP-CTS
Installing DT Series Digital and IP Multiline Terminals
Description
Description