Figure 5-122 Attach Dss Wm-L Unit Using Screws; Figure 5-123 Attach Dss Wm-L Unit To Wall Plate; Mount Dcl-60-1/Dcz-60-2 Console On Wall Plate Using Dss Wm-L Unit - NEC Univerge SV9100 System Hardware Manual

Issue 2.0
SV9100 System Hardware Manual
1.

Figure 5-122 Attach DSS WM-L UNIT Using Screws

5.2.9.2 Mount DCL-60-1/DCZ-60-2 CONSOLE on Wall Plate
using DSS WM-L UNIT
1.
Attach the DSS WM-L UNIT to the wall using six screws or,
using two wall mounted screws (refer to
DSS WM-L UNIT Using Screws).
Locate the screw holes on the base and hang the cover over
the screws on the wall plate as illustrated in
Attach DSS WM-L UNIT to Wall

Figure 5-123 Attach DSS WM-L UNIT to Wall Plate

 Because of variation in wall plates, this method is not
recommended.
Figure 5-122 Attach
Figure 5-123
Plate.
5-107