Figure 3-40 Gpz-Bs11 Components; Install The Gpz-Bs11 Expansion Blade In The Chs2Ug B Expan Sion Chassis - NEC Univerge SV9100 System Hardware Manual

Issue 2.0
SV9100 System Hardware Manual
3.5.2.3 Install the GPZ-BS11 Expansion Blade in the CHS2UG B
Expansion Chassis

Figure 3-40 GPZ-BS11 Components

WARNING
1.
2.
3.
Figure 3-41 CHS2UG B Expansion Bay
4.
5.
For the Expansion Chassis to function, the
GPZ-BS10 blade must be installed in Controlling
CAUTION
Chassis.
Do not remove or install this blade with the power
on.
Ensure the chassis is powered down.
Locate the door positioned on the left end (expansion bay)
of the Expansion Chassis.
From the right side of the door, pinch the Door Clip and pull
the cover outward to expose the expansion bay.
Pull the cover toward you to remove.
Cover must be removed prior to installation
of GPZ-BS11 blade.
IMPORTANT
Remove knockout in center of cover.
3-33