Figure 3-89 Assemble Stand Mount With Screws; Stand Mounting The 19" (Chs2Ug) Chassis - NEC Univerge SV9100 System Hardware Manual

S 6 S
ECTION TAND
6.1
3-72
3. Connect the ground wire to all chassis. Refer to
Grounding on 19" Chassis on page 3-19
grounding the system.
4. Refer to
continue installation of the chassis or, Chapter 6 paragraph
Installation and Safety Precautions on page 4-4
blades.
M C
OUNTING THE

Stand Mounting the 19" (CHS2UG) Chassis

A single or multiple chassis can be stand mounted. Controlling and Expansion
chassis can be stand mounted using the CHS2UG STAND KIT (K) and CHS2UG
STAND KIT (EXT).
6.1.1 CHS2UG Chassis Installation
1. Using the supplied screws, assemble the CHS2UG STAND KIT (K)
and CHS2UG STAND KIT (EXT) (refer to
Stand Mount with

Figure 3-89 Assemble Stand Mount with Screws

2. Secure the CHS2UG chassis to the assembled CHS2UG STAND KIT
(K), see
KIT (K) with Screws on page
3.3.5 Install AC Power Cords on 19" Chassis on page 3-20
HASSIS
Screws).
Figure 3-90 Secure CHS2UG Chassis to CHS2UG STAND
3-73.
Issue 2.0
3.3.3 Install
for complete details on
2.1
for installation of
Figure 3-89 Assemble
Expansion
Plate
Installing the SV9100 Chassis
to