Figure 5-89 Install Screw - NEC Univerge SV9100 System Hardware Manual

Issue 2.0
5-86
11. Holding the LCD in place, turn the multiline terminal button
side down.
12. Install the screw (refer to

Figure 5-89 Install Screw

Side Panel
13. Attach the side panel to the side of the 8LKD (LD)-L UNIT
(refer to Figure 5-95 Install Screw on page
14. Return the multiline terminal to the buttons side up.
15. Connect the line cord/LAN cable and the AC/DC adapter to
the DTL multiline terminal.
Installing DT Series Digital and IP Multiline Terminals
Figure 5-89 Install Screw).
Screw
5-90).