Section 3 Bluetooth Hub Adapter; Bluetooth Hub Adapter (Bha) Features; Installing The Bha-L Unit; Figure 6-20 Separate Tilt Leg From Leg Support - NEC Univerge SV9100 System Hardware Manual

S 3 B
ECTION LUETOOTH
3.1
6-16
H A
UB DAPTER

Bluetooth Hub Adapter (BHA) Features

The BHA-L UNIT adapter connects a Bluetooth device to a multiline terminal. The
BHA-L UNIT cannot be connected to the DTL-2E-1, DTL-6DE-1 or DTL-12E-1
telephone.
3.1.1

Installing the BHA-L UNIT

IMPORTANT
1. Turn multiline terminal upside down.
2. Unplug the line cord and handset cord from the multiline terminal.
 Only one BHA-L UNIT can be attached to the DTL multiline
terminal.
3. Lower the tilt leg to the first position (refer to
Leg from Leg

Figure 6-20 Separate Tilt Leg from Leg Support

Tilt Leg
4. Remove the connector cover (rubber) from the bottom of the multiline
terminal (see
6-17).
Before installing or removing the BHA-L UNIT, remove the
line cord and the AC adapter from the outlet.
Support).
Figure 6-21 Removing the Connector Cover on page
Installing SV9100 Cordless Telephones
Issue 2.0
Figure 6-20 Separate Tilt
Stoppers