4-16
Figure 4-7 GCD-CP10 Blade with Daughter Boards Installed
3.1.1
Description
The GCD-CP10 controls all the functions and operations of the SV9100
system using the system software loaded into the GCD-CP10 memory. The
system software can be upgraded as new software becomes available.
One GCD-CP10 blade must be installed in the Controlling Chassis.
The GCD-CP10 functions are:
Music on Hold tone Circuit, External Source Control Circuit
Voice Mail/VRS Interface Circuit
VM recording time
SD-A1 memory card: 15 hours
SD-B1 memory card: 120 hours
Number of mail boxes: 896
System Program and System Data Storing Memory Circuit
SD Card/USB Interface Circuit
Ethernet Interface Circuit
Issue 2.0
Installing the SV9100 Blades