Figure 7-41 Grooved Cutout For Serial Cable; Figure 7-42 Insert Stopper For Handset Use - NEC Univerge SV9100 System Hardware Manual

7-44
10. Gently press the serial cable into the grooved cutout for the cable.

Figure 7-41 Grooved Cutout for Serial Cable

11. Connect the serial connection cord (refer to
UNIT to the Multiline Terminal on page
the terminal body.
12. Open the Dip Switch Cover (refer to
Connections on page
to the required position. Close the cover.
13. If using the handset, place the stopper in the tilt leg.

Figure 7-42 Insert Stopper for Handset Use

Cable Groove
Figure 7-40 Attach PSA-L
7-43) from the PSA-L UNIT to
Figure 7-36 PSA-L UNIT
7-41). Set the dip switch on the PSA-L adapter
Installing SV9100 Optional Equipment
Issue 2.0