Table 4-29 Gcd-Prta Led Indications - NEC Univerge SV9100 System Hardware Manual

Issue 2.0

Table 4-29 GCD-PRTA LED Indications

LED Indication
Live LED
Busy LED (Red)
(Green)
On On
Flash (1s) On
Flash (1s)
On
Flash
(100ms)
Off
On
Off
Off
Flash 80ms (On/
Off) x 3/400ms
Off
SV9100 System Hardware Manual
LED indications for the GCD-PRTA are listed in
Indications. Each LED is listed with its associated function and LED and
Operational status.
Refer to Figure 4-24 GCD-PRTA Blade on page 4-68
LEDs on the blade.
Operation Status
System Initializing
The assignment of the unit is refused.
Trouble found during self-diagnostics.
A Channel is busy (use
Normal
another from CH1 ~ CHx).
Operation
All channels are idle.
A Channel is busy (use
Unit Busy
another from CH1 ~ CHx).
All channels are idle.
Downloading firmware.
Table 4-29 GCD-PRTA LED
for the location of the
Remarks
–
When you exceed the system
capacity.
When the main software version is
not matched.
–
–
–
–
–
–
4-71