11.3.3 Ada-L Unit Connection; Ada-L Unit Connection For Recording Only; Ada-L Unit Connection For Sending Recorded Calls To The Telephone; Figure 7-27 Ada-L Out Jack Connection - NEC Univerge SV9100 System Hardware Manual

7-34

11.3.3 ADA-L UNIT Connection

The mini-plug connection cord should not use an attenuator. Use a
monaural (single ring) mini-plug connection for normal recording.
CAUTION
11.3.3.1

ADA-L UNIT Connection for Recording Only

10.
11.

Figure 7-27 ADA-L OUT Jack Connection

11.3.3.2 ADA-L UNIT Connection for Sending Recorded Calls to
the Telephone
1.
Set the ADA-L UNIT DSW switches (Refer to
ADA-L UNIT on page 7-30).
Set DSW 6 to ON.
❍
❍ DSW switch 5 is used to change the output
NOTE
level from the OUT jack of the ADA-L
UNIT
(On = Low, Off = High).
Using the mini-plug connection cord, connect the ADA-L
UNIT Out jack to the cassette recorder MIC jack (Refer to
Figure 7-27 ADA-L OUT Jack Connection on page
Set the ADA-L UNIT DSW switches (see
UNIT on page 7-30).
❍ Set DSW 6 to ON.
❍ When sending recorded calls to the
NOTE
telephone, set DSW switch 1 to ON.
Installing SV9100 Optional Equipment
Issue 2.0
Figure 7-23
.
7-34)
Figure 7-23 ADA-L