Table 5-4 Firmware Compatibility Matrix - NEC Univerge SV9100 System Hardware Manual

Issue 2.0
Terminal
Lot
Number
DT-330
 BCH Support may differ based on terminal firmware. To verify both DT-330 terminal and BCH-L
Unit firmware, hold down keypad buttons 1, 2 and 3 while plugging the line cord into the terminal.
5-6
Table 5-3 Terminal and Adapter Compatibility (DT400/DT800)
Terminal
Digital Terminals: DT400
DTZ-2E-3 (BK) TEL
DTZ-6DE-3 (BK) TEL
DTZ-12D-3 (BK)/(WH) TEL
DTZ-24D-3 (BK)/(WH) TEL
DTZ-8LD-3 (BK)/(WH) TEL
IP Terminals: DT800
ITZ-8LD-3 (BK) TEL
ITZ-12D-3 (BK)/(WH) TEL
ITZ-24D-3 (BK)/(WH) TEL
ITZ-12CG-3 (BK)/(WH) TEL
ITZ-12DG-3 (BK)/(WH) TEL
ITZ-8LDG-3 (BK)/(WH) TEL
Console:
DCZ-60-2 (BK)/(WH) CONSOLE

= When the ILPA-R unit is used, 1000 BASE-T is not available.

Table 5-4 Firmware Compatibility Matrix

xxx I xx or lower
(Version 8.10 and 1, E0 or lower)
xxxJxx or higher
(Version 2.20 or higher)
Adapter Unit
ADA-L APR-L
ILPA
— —
— —
 
 
 
—

—

—

—

—

—

— —
BCH-L Unit Lot Number
xxxDxx or lower
Supported
Not supported
Installing DT Series Digital and IP Multiline Terminals

BHA-Z BCA-Z
— — —
— — —
—
 
—
 
—
 
—
 
—
 
—
 
—
 
—
 
—
 
— — —
xxxExx or higher
Supported
Supported