Installing The Directory Card On The Multiline Terminal; Figure 5-52 Attaching Directory Card To Directory Card Holder - NEC Univerge SV9100 System Hardware Manual

Issue 2.0
4.6
5-60

Installing the Directory Card on the Multiline Terminal

A directory card can be attached to DT300/DT700 Series multiline terminals. The
directory card can be used to record often dialed numbers or other important
information.
1. After recording the information on the lined insert, reinsert it between the
plastic panels of the directory card. Attach the directory card to the directory
card holder as illustrated in
Directory Card Holder. The open end slides into the directory card holder.

Figure 5-52 Attaching Directory Card to Directory Card Holder

Directory Card
2. Locate the two grooves on the top of the telephone as illustrated in
5-53 Attaching Directory Card Holder to the Multiline
directory card holder into the grooves on the multiline terminal until they
snap into place.

To remove the directory card, press the two sides of the directory card holder
inward until the tabs release and pull the holder out of the grooves.
Figure 5-52 Attaching Directory Card to
Installing DT Series Digital and IP Multiline Terminals
Directory Card
Holder
Figure
Terminal. Push the