Figure 5-82 Securing The 8Lk-L Unit With Screws; Figure 5-83 Install The 8Lk-L Unit Cable - NEC Univerge SV9100 System Hardware Manual

Issue 2.0
5-82
6. Secure the 8LK-L UNIT with the two screws provided.

Figure 5-82 Securing the 8LK-L UNIT with Screws

7. Turn the multiline terminal upside down.
8. Open the small door covering the side option connectors by
pulling the cover handle to the front.

Figure 5-83 Install the 8LK-L UNIT Cable

Telephone
Connection Cable
Cover
9. Connect the cable from the 8LK-L UNIT to the side option
connector (see Figure 5-83 Install the 8LK-L UNIT
the multiline terminal and close the cover.
10. Attach the side panel to the side of the 8LK-L UNIT.
11. Return the multiline terminal to the buttons side up.
12. Complete the installation by reattaching both plastic panels
to the front of the multiline terminal.
Installing DT Series Digital and IP Multiline Terminals
Side Option
Connector
Cable) on