Issue 2.0
4.9
SV9100 System Hardware Manual
9.
Press Softkey for OK to complete.
10.
Continue pressing Softkey to exit (Exit-Exit-Save). The terminal
resets automatically.
Install the Sticker-Braille-L KIT
Stickers 1 and 2 (2-button, 6-button, 12-button and 24-button telephones)
Stickers 1 and 2 are attached by peeling the sticker from the sheet and applying it
to the face plate (it can be applied over the LCD) or by cutting the sticker from the
sheet and placing the sticker in the Directory Card holder.
Sticker 3 (12-button and 24-button telephones)
The LN/LND sticker is applied directly to the button by peeling the sticker from the
sheet and applying it directly on the button face.
Sticker 4 (2-button, 6-button, 12-button, and 24-button telephones)
The HLD/HOLD, SP/SPK and CNF/CONF stickers are applied by peeling the
sticker from the sheet and applying the sticker below the appropriate button.
Figure 5-64 Sticker-Braille-L KIT (Sheet 1)
5-69