Issue 2.0
SV9100 System Hardware Manual
Figure 3-82 Wall Mount – Lower Side (Small Batt Box)
6.
Align the upper and lower bracket holes with the heads of
anchor bolts mounted on the wall and slide downward.
7.
Connect grounding wire to chassis. Refer to Chapter 4
paragraph
3.5 Installing the 9.5" Base (CHS2UG B) and
Expansion (CHS2UG E) Chassis on page 3-24
details on grounding the system.
8.
Refer to
3.5.5 Install AC Power Cord on 9.5" Base and
Expansion Chassis on page 3-37
power cord or, Chapter 6 paragraph
Safety Precautions on page 4-4
for complete
for installation of the
2.1 Installation and
for installation of blades.
3-67