Figure 4-18 Gcd-Lta Blade; Table 4-19 Gcd-Lta Led Indications - NEC Univerge SV9100 System Hardware Manual

Issue 2.0

Table 4-19 GCD-LTA LED Indications

LED Indication
Live LED
Busy LED (Red)
(Green)
On On
Flash (1s) On
Flash (1s)
On
Flash
(100ms)
Off
On
Off
Off
Flash 80ms (On/
Off) x 3/400ms
Off
SV9100 System Hardware Manual
4.5.3 LED Indications
LED indications for the GCD-LTA are indicated in
Indications. Each LED is listed with its associated function and LED and
Operational status. Refer to
the location of the LEDs on the blade.
Operation Status
System Initializing
The assignment of the unit is refused.
Trouble found during self-diagnostics.
A Channel is busy (use
Normal
another from CH1 ~ CHx).
Operation
All channels are idle.
A Channel is busy (use
Unit Busy
another from CH1 ~ CHx).
All channels are idle.
Downloading firmware.
Table 4-19 GCD-LTA LED
Figure 4-18 GCD-LTA Blade on page 4-47
–
When you exceed the system
capacity.
When the main software version is
not matched.
–
–
–
–
–
–
for
Remarks
4-49