Figure 3-104 Attach Rack Mount Brackets To 9.5" Chassis - NEC Univerge SV9100 System Hardware Manual

7.2
3-84
7. Refer to 3.3.5 Install AC Power Cords on 19" Chassis on page 3-20
continue installation of the chassis or, Chapter 6 paragraph
and Safety Precautions on page 4-4
Rack Mounting the 9.5" Base (CHS2UG B) and Expansion
(CHS2UG E) Chassis
To rack mount the combined Base (CHS2UG B) and Expansion (CHS2UG E)
chassis, the IP5D-RACK MOUNT BAR SET is required.
Controlling and Expansion chassis must be installed vertically for proper
air circulation.
WARNING
1. Attach the metal rack mount brackets to each side of the chassis using the
screws provided (refer to
Chassis).

Figure 3-104 Attach Rack Mount Brackets to 9.5" Chassis

for installation of blades.
Figure 3-104 Attach Rack Mount Brackets to 9.5"
Issue 2.0
to
2.1 Installation
Installing the SV9100 Chassis