Issue 2.0
5-84
2.
Pry the side panel from the multiline terminal.
Figure 5-85 Remove Side Panel from Multiline Terminal
Side Panel
3.
Remove the screw (refer to
from Multiline Terminal on page
4.
Carefully, return the multiline terminal to the buttons side up.
5.
Remove the Softkeys and Line Key kit from the telephone.
6.
Gently lift the small black bar on the ribbon cable connector
(refer to
Figure 5-86 Ribbon Cable
Figure 5-86 Ribbon Cable Connector
Installing DT Series Digital and IP Multiline Terminals
Screw
Figure 5-85 Remove Side Panel
5-84).
Connector).
Lift
Here