Figure 3-86 Install Chs2Ug Joint Bracket Kit - NEC Univerge SV9100 System Hardware Manual

3-70
6. Secure the chassis to the CHS BASE UNIT using eight screws
supplied with the CHS2UG JOINT BRACKET KIT.

Figure 3-86 Install CHS2UG JOINT BRACKET KIT

7. Connect the ground wire to all chassis. Refer to
Grounding on 19" Chassis on page 3-19
grounding the system.
8. Refer to 3.3.5 Install AC Power Cords on 19" Chassis on page 3-20
continue installation of the chassis or, Chapter 6 paragraph
Installation and Safety Precautions on page 4-4
blades.
Issue 2.0
3.3.3 Install
for complete details on
2.1
for installation of
Installing the SV9100 Chassis
to