Unmanaged Switch Functions; Led Indications; Connectors; Table 4-38 Gcd-Etia Led Indications - NEC Univerge SV9100 System Hardware Manual

4-98
3.
The grouping of the three GSWU units to form a 20 port switch
is restricted to reside in a single system location. The grouping
is not allowed where the GSWU units are placed as part of the
NetLink feature in the Univerge SV9100 system.
6.4.2.5

Unmanaged Switch Functions

In the unmanaged mode, a GSWU unit has the following
functions only:


6.4.3

LED Indications

Table 4-38 GCD-ETIA LED Indications

describes what the LED indicates.
Table 4-38 GCD-ETIA LED Indications
Port State
1000Mbps Link
10/100Mbps Link
No Link
Port Activity
6.4.4

Connectors

Backplane Connector – J1 connection to system CPU board and other
boards in the chassis.
User relocates the Main board to slot 4.
None of the port numbers change. However, the

programming in Program 10-55 must be changed to
reflect this move
10 Base-T/100 Base-TX/1000 Base-T) Ethernet ports
(x8)
PoE Class 3 (lowest power class)
lists the LEDs and provides a
LED Display
Green Solid
Yellow Solid
Off
LED Blinking
Issue 2.0
Installing the SV9100 Blades