Removing The Numbered Keypad; Figure 5-55 Remove Plastic Panels; Figure 5-56 Removing Numbered Keypad From Dt300/Dt700 Series Terminal - NEC Univerge SV9100 System Hardware Manual

Issue 2.0
5-62
4.7.1

Removing the Numbered Keypad

WARNING
1. Remove the Numbered Keypad Panel. (Refer to paragraph
5-55 Remove Plastic
Line Key
Panel
Numbered
Keypad
Panel
2. Pull down on the tab and lift the Numbered Keypad away from the
telephone to remove the existing button. Refer to
Removing Numbered Keypad from DT300/DT700 Series
Figure 5-56 Removing Numbered Keypad from DT300/DT700 Series
To prevent possible damage to the Numbered Keypad or the
DTL/ITL multiline terminal during installation or removal,
disconnect the line cord/LAN cable and the AC/DC adapter
from the DTL/ITL multiline terminal.
Panels.)

Figure 5-55 Remove Plastic Panels

Terminal
Installing DT Series Digital and IP Multiline Terminals
Figure
Desi Printer
Sheet
Figure 5-56
Terminal.