Table 4-13 Gcd-8Dlca/Gcd-16Dlca Led Indications; Table 4-14 Gcd-8Dlca/Gcd-16Dlca Rj-61 Cable Connector Pin-Outs; Connectors - NEC Univerge SV9100 System Hardware Manual

Issue 2.0

Table 4-13 GCD-8DLCA/GCD-16DLCA LED Indications

LED Indication
Live LED Busy LED
(Green) (Red)
On On
Flash (1s) On
Flash (1s)
On
Flash
(100ms)
Off
On
Off
Off
Flash 80ms
(On/Off) x 3/
400ms Off
SV9100 System Hardware Manual
Operation Status
System Initializing
The assignment of the unit is refused.
Trouble found during self-diagnostics.
A Channel is busy (use
Normal
another from CH1 ~ CHx).
Operation
All channels are idle.
A Channel is busy (use
Unit Busy
another from CH1 ~ CHx).
All channels are idle.
Downloading firmware.
4.1.4

Connectors

The CNx01 connectors provide connection to four digital station ports. With
the GCD-16DLCA blade, the CN101, CN201, CN301, and CN401
connectors are available. With the GCD-8DLCA blade the CN301 and
CN401connectors are removed from the blade.
IMPORTANT

Table 4-14 GCD-8DLCA/GCD-16DLCA RJ-61 Cable Connector Pin-Outs

on page 4-36 show the pin-outs for the RJ-61 connector. Refer to
4-14 GCD-8DLCA/GCD-16DLCA Blade on page 4-33
connectors on the ESIU blades.
Any cabling to the DLCA blade must be in the building - no
outside cabling is permitted.
Remarks
–
When you exceed the system
capacity.
When the main software version
is not matched.
–
–
–
–
–
–
Figure
for the location of the
4-35