Adjusting The Lcd On The Multiline Terminal; Installing Line Key Kit (12Lk-L Kit); Installing The 12Lk-L Kit; Figure 5-43 Adjusting The Lcd On A Multiline Terminal - NEC Univerge SV9100 System Hardware Manual

Issue 2.0
4.4
4.5
5-52

Adjusting the LCD on the Multiline Terminal

DT series display multiline terminals have an adjustable Liquid Crystal Display
(LCD). The LCD can be adjusted by pulling up or pushing down as desired.

Figure 5-43 Adjusting the LCD on a Multiline Terminal

Installing Line Key Kit (12LK-L KIT)

The 12LK-L KIT Provides 12 additional buttons to ITL or DTL multiline terminals.
The 12LK-L KIT kit:
Mounts directly to top side of terminal

Supports Red and Green LED colors


Figure 5-44 12LK-L Kit

4.5.1

Installing the 12LK-L KIT

WARNING
1. Turn multiline terminal upside down.
To prevent possible damage to the 12LK-L KIT or the DTL/
ITL multiline terminal during installation or removal,
disconnect the line cord/LAN cable and the
AC/DC adapter from the DTL/ITL multiline terminal.
Installing DT Series Digital and IP Multiline Terminals