Configuring The Ip Telephone For The Correct Number Of Line Keys; Table 5-12 Line Key Type; Table 5-13 Ten Key Kit Type - NEC Univerge SV9100 System Hardware Manual

Issue 2.0
5-58
3. Follow the directions below for the type of line key module installed:

Table 5-12 Line Key Type

2-Button
6-Button
8-Button
12-Button
24-Button
4. Save to memory by pressing line key 2, 8, 14 or 20. The display
changes back to the Service Class R/W mode and the Message
Waiting (MW) LED is On Red.
5. Press Exit to return the telephone to idle.
4.5.3 Configuring the IP Telephone for the Correct Number of Line
Keys
1. Press Menu, then 0 (Config) to enter the terminal program mode.
2. At the Login screen, enter the user name (default = ADMIN) and
password (default = 6633222) and press the OK Softkey.
3. Press 3 for Maintenance Setting.
4. Press 4 for Adjust.
5. Press 2 for Key Kit Type.
6. Press the Up/Down key to select the Key Kit.
Ten Key Kit Entry
Line Key Type

Table 5-13 Ten Key Kit Type

Kit1 Type A – Japan with cursor key
Kit2 Type A – US with cursor key
Kit3 Type B – US with cursor key
Kit4
Kit8 32 Line Key without cursor key
Kit9 Type A – Japan without cursor key
Kit10 Type A – US without cursor key
Kit11
Type B – US without cursor key
Kit12
Installing DT Series Digital and IP Multiline Terminals
Push
1
2
3
4
5
Description