Installation - NEC Univerge SV9100 System Hardware Manual

Hide thumbs Also See for Univerge SV9100:

Table of Contents

The blade provides:

Eight Digital Station ports

Two analog extension ports support Caller ID Circuit, Message

Waiting Lamp Control (Controlling Voltage:-110Vdc) for all ports

Two status LEDs

Refer to the following tables for maximum upgrade capacities of the

GCD-LTA blade:

Table 2-6 SV9100 Maximum 9.5" Gateway and 19" System Capacities

– Blades on page 2-12

Table 2-7 SV9100 Maximum 9.5" Base and Expansion System

Capacities – Blades on page 2-14

Installation

Install the GCD-LTA blade in any available universal slot.

When connecting a fax machine or analog modem, make

sure to set Program 15-03-03 to 1 (special terminal) to avoid

communication problems.

The GCD-LTA is categorized as TNV2. With this

designation, off-premise wiring is not acceptable.

Branch connection is not acceptable.

Installing the SV9100 Blades